diff --git a/ESP8266/sensornode/sensornode.ino b/ESP8266/sensornode/sensornode.ino
index 2266b0b..0ed48d3 100644
--- a/ESP8266/sensornode/sensornode.ino
+++ b/ESP8266/sensornode/sensornode.ino
@@ -1,11 +1,8 @@
 #include "DHT.h"
 #include <ESP8266WiFi.h>
-#include "aREST.h"
-#include <climits>
+#include <ESP8266HTTPClient.h>
 
-//If the debug macro is enabled, there's a freeMemory routine
-//Check if this resolves the crashes...
-#define DEBUG_MODE 1
+#include <climits>
 
 
 //DHT settings:
@@ -25,21 +22,10 @@
 // as the current DHT reading algorithm adjusts itself to work on faster procs.
 DHT dht(DHTPIN, DHTTYPE);
 
-// Create aREST instance
-aREST rest = aREST();
 
 // WiFi settings:
-const char* ssid = "Your_SSID";
-const char* password = "Your_Password";
-
-#define LISTEN_PORT 80
-
-// Create an instance of the server
-WiFiServer server(LISTEN_PORT);
-
-// Variables to be exposed to the API
-float temperature;
-float humidity;
+const char* ssid = "Klenkschachtel";
+const char* password = "KS!;3k@S$h=?AL";
 
 
 //milli counter
@@ -60,15 +46,6 @@ void setup() {
   //dht driver initialization
   dht.begin();
 
-  //Expose variables to the rest api
-  rest.variable("temperature", &temperature);
-  rest.variable("humidity", &humidity);
-
-  // Set a ID (ID must be greater than 0)
-  rest.set_id("1");
-  rest.set_name("sensornode");
-
-
   // Connect to WiFi
   Serial.println("Connecting to wlan");
   WiFi.begin(ssid, password);
@@ -78,10 +55,6 @@ void setup() {
   }
   Serial.println("\nWiFi connected");
 
-  // Start the server
-  server.begin();
-  Serial.println("Server started");
-
   // Print the IP address
   Serial.println(WiFi.localIP());
 }
@@ -102,9 +75,14 @@ void loop() {
       Serial.println("Failed to read from DHT sensor!");
       return;
     } else {
-      //set the new values
-      humidity = h;
-      temperature = t;
+      // Initialize the client library
+      HTTPClient client;
+
+      // Make a HTTP request:
+      String url = "http://raspitemp:1337/abshum/" + String(t) + "/" + String(h);
+      client.begin(url);
+      client.GET();
+      client.end();
     }
 
     //set new milli counter
@@ -115,16 +93,9 @@ void loop() {
       millitotal = 0;
     }
   }
-  // Handle REST calls
-  WiFiClient client = server.available();
-  if (!client) {
-    return;
-  }
-  while(!client.available()){
-    delay(1);
-  }
-  rest.handle(client);
 
+  
+  //ESP.deepSleep(MEASURESECONDS * 1000);
   //Let the esp chill a bit
   delay(100);
 }
diff --git a/ESP8266/sensornode_aRest/DHT.cpp b/ESP8266/sensornode_aRest/DHT.cpp
new file mode 100644
index 0000000..86ad91c
--- /dev/null
+++ b/ESP8266/sensornode_aRest/DHT.cpp
@@ -0,0 +1,259 @@
+/* DHT library
+
+MIT license
+written by Adafruit Industries
+*/
+
+#include "DHT.h"
+
+#define MIN_INTERVAL 2000
+
+DHT::DHT(uint8_t pin, uint8_t type, uint8_t count) {
+  _pin = pin;
+  _type = type;
+  #ifdef __AVR
+    _bit = digitalPinToBitMask(pin);
+    _port = digitalPinToPort(pin);
+  #endif
+  _maxcycles = microsecondsToClockCycles(1000);  // 1 millisecond timeout for
+                                                 // reading pulses from DHT sensor.
+  // Note that count is now ignored as the DHT reading algorithm adjusts itself
+  // basd on the speed of the processor.
+}
+
+void DHT::begin(void) {
+  // set up the pins!
+  pinMode(_pin, INPUT_PULLUP);
+  // Using this value makes sure that millis() - lastreadtime will be
+  // >= MIN_INTERVAL right away. Note that this assignment wraps around,
+  // but so will the subtraction.
+  _lastreadtime = -MIN_INTERVAL;
+  DEBUG_PRINT("Max clock cycles: "); DEBUG_PRINTLN(_maxcycles, DEC);
+}
+
+//boolean S == Scale.  True == Fahrenheit; False == Celcius
+float DHT::readTemperature(bool S, bool force) {
+  float f = NAN;
+
+  if (read(force)) {
+    switch (_type) {
+    case DHT11:
+      f = data[2];
+      if(S) {
+        f = convertCtoF(f);
+      }
+      break;
+    case DHT22:
+    case DHT21:
+      f = data[2] & 0x7F;
+      f *= 256;
+      f += data[3];
+      f *= 0.1;
+      if (data[2] & 0x80) {
+        f *= -1;
+      }
+      if(S) {
+        f = convertCtoF(f);
+      }
+      break;
+    }
+  }
+  return f;
+}
+
+float DHT::convertCtoF(float c) {
+  return c * 1.8 + 32;
+}
+
+float DHT::convertFtoC(float f) {
+  return (f - 32) * 0.55555;
+}
+
+float DHT::readHumidity(bool force) {
+  float f = NAN;
+  if (read()) {
+    switch (_type) {
+    case DHT11:
+      f = data[0];
+      break;
+    case DHT22:
+    case DHT21:
+      f = data[0];
+      f *= 256;
+      f += data[1];
+      f *= 0.1;
+      break;
+    }
+  }
+  return f;
+}
+
+//boolean isFahrenheit: True == Fahrenheit; False == Celcius
+float DHT::computeHeatIndex(float temperature, float percentHumidity, bool isFahrenheit) {
+  // Using both Rothfusz and Steadman's equations
+  // http://www.wpc.ncep.noaa.gov/html/heatindex_equation.shtml
+  float hi;
+
+  if (!isFahrenheit)
+    temperature = convertCtoF(temperature);
+
+  hi = 0.5 * (temperature + 61.0 + ((temperature - 68.0) * 1.2) + (percentHumidity * 0.094));
+
+  if (hi > 79) {
+    hi = -42.379 +
+             2.04901523 * temperature +
+            10.14333127 * percentHumidity +
+            -0.22475541 * temperature*percentHumidity +
+            -0.00683783 * pow(temperature, 2) +
+            -0.05481717 * pow(percentHumidity, 2) +
+             0.00122874 * pow(temperature, 2) * percentHumidity +
+             0.00085282 * temperature*pow(percentHumidity, 2) +
+            -0.00000199 * pow(temperature, 2) * pow(percentHumidity, 2);
+
+    if((percentHumidity < 13) && (temperature >= 80.0) && (temperature <= 112.0))
+      hi -= ((13.0 - percentHumidity) * 0.25) * sqrt((17.0 - abs(temperature - 95.0)) * 0.05882);
+
+    else if((percentHumidity > 85.0) && (temperature >= 80.0) && (temperature <= 87.0))
+      hi += ((percentHumidity - 85.0) * 0.1) * ((87.0 - temperature) * 0.2);
+  }
+
+  return isFahrenheit ? hi : convertFtoC(hi);
+}
+
+boolean DHT::read(bool force) {
+  // Check if sensor was read less than two seconds ago and return early
+  // to use last reading.
+  uint32_t currenttime = millis();
+  if (!force && ((currenttime - _lastreadtime) < 2000)) {
+    return _lastresult; // return last correct measurement
+  }
+  _lastreadtime = currenttime;
+
+  // Reset 40 bits of received data to zero.
+  data[0] = data[1] = data[2] = data[3] = data[4] = 0;
+
+  // Send start signal.  See DHT datasheet for full signal diagram:
+  //   http://www.adafruit.com/datasheets/Digital%20humidity%20and%20temperature%20sensor%20AM2302.pdf
+
+  // Go into high impedence state to let pull-up raise data line level and
+  // start the reading process.
+  digitalWrite(_pin, HIGH);
+  delay(250);
+
+  // First set data line low for 20 milliseconds.
+  pinMode(_pin, OUTPUT);
+  digitalWrite(_pin, LOW);
+  delay(20);
+
+  uint32_t cycles[80];
+  {
+    // Turn off interrupts temporarily because the next sections are timing critical
+    // and we don't want any interruptions.
+    InterruptLock lock;
+
+    // End the start signal by setting data line high for 40 microseconds.
+    digitalWrite(_pin, HIGH);
+    delayMicroseconds(40);
+
+    // Now start reading the data line to get the value from the DHT sensor.
+    pinMode(_pin, INPUT_PULLUP);
+    delayMicroseconds(10);  // Delay a bit to let sensor pull data line low.
+
+    // First expect a low signal for ~80 microseconds followed by a high signal
+    // for ~80 microseconds again.
+    if (expectPulse(LOW) == 0) {
+      DEBUG_PRINTLN(F("Timeout waiting for start signal low pulse."));
+      _lastresult = false;
+      return _lastresult;
+    }
+    if (expectPulse(HIGH) == 0) {
+      DEBUG_PRINTLN(F("Timeout waiting for start signal high pulse."));
+      _lastresult = false;
+      return _lastresult;
+    }
+
+    // Now read the 40 bits sent by the sensor.  Each bit is sent as a 50
+    // microsecond low pulse followed by a variable length high pulse.  If the
+    // high pulse is ~28 microseconds then it's a 0 and if it's ~70 microseconds
+    // then it's a 1.  We measure the cycle count of the initial 50us low pulse
+    // and use that to compare to the cycle count of the high pulse to determine
+    // if the bit is a 0 (high state cycle count < low state cycle count), or a
+    // 1 (high state cycle count > low state cycle count). Note that for speed all
+    // the pulses are read into a array and then examined in a later step.
+    for (int i=0; i<80; i+=2) {
+      cycles[i]   = expectPulse(LOW);
+      cycles[i+1] = expectPulse(HIGH);
+    }
+  } // Timing critical code is now complete.
+
+  // Inspect pulses and determine which ones are 0 (high state cycle count < low
+  // state cycle count), or 1 (high state cycle count > low state cycle count).
+  for (int i=0; i<40; ++i) {
+    uint32_t lowCycles  = cycles[2*i];
+    uint32_t highCycles = cycles[2*i+1];
+    if ((lowCycles == 0) || (highCycles == 0)) {
+      DEBUG_PRINTLN(F("Timeout waiting for pulse."));
+      _lastresult = false;
+      return _lastresult;
+    }
+    data[i/8] <<= 1;
+    // Now compare the low and high cycle times to see if the bit is a 0 or 1.
+    if (highCycles > lowCycles) {
+      // High cycles are greater than 50us low cycle count, must be a 1.
+      data[i/8] |= 1;
+    }
+    // Else high cycles are less than (or equal to, a weird case) the 50us low
+    // cycle count so this must be a zero.  Nothing needs to be changed in the
+    // stored data.
+  }
+
+  DEBUG_PRINTLN(F("Received:"));
+  DEBUG_PRINT(data[0], HEX); DEBUG_PRINT(F(", "));
+  DEBUG_PRINT(data[1], HEX); DEBUG_PRINT(F(", "));
+  DEBUG_PRINT(data[2], HEX); DEBUG_PRINT(F(", "));
+  DEBUG_PRINT(data[3], HEX); DEBUG_PRINT(F(", "));
+  DEBUG_PRINT(data[4], HEX); DEBUG_PRINT(F(" =? "));
+  DEBUG_PRINTLN((data[0] + data[1] + data[2] + data[3]) & 0xFF, HEX);
+
+  // Check we read 40 bits and that the checksum matches.
+  if (data[4] == ((data[0] + data[1] + data[2] + data[3]) & 0xFF)) {
+    _lastresult = true;
+    return _lastresult;
+  }
+  else {
+    DEBUG_PRINTLN(F("Checksum failure!"));
+    _lastresult = false;
+    return _lastresult;
+  }
+}
+
+// Expect the signal line to be at the specified level for a period of time and
+// return a count of loop cycles spent at that level (this cycle count can be
+// used to compare the relative time of two pulses).  If more than a millisecond
+// ellapses without the level changing then the call fails with a 0 response.
+// This is adapted from Arduino's pulseInLong function (which is only available
+// in the very latest IDE versions):
+//   https://github.com/arduino/Arduino/blob/master/hardware/arduino/avr/cores/arduino/wiring_pulse.c
+uint32_t DHT::expectPulse(bool level) {
+  uint32_t count = 0;
+  // On AVR platforms use direct GPIO port access as it's much faster and better
+  // for catching pulses that are 10's of microseconds in length:
+  #ifdef __AVR
+    uint8_t portState = level ? _bit : 0;
+    while ((*portInputRegister(_port) & _bit) == portState) {
+      if (count++ >= _maxcycles) {
+        return 0; // Exceeded timeout, fail.
+      }
+    }
+  // Otherwise fall back to using digitalRead (this seems to be necessary on ESP8266
+  // right now, perhaps bugs in direct port access functions?).
+  #else
+    while (digitalRead(_pin) == level) {
+      if (count++ >= _maxcycles) {
+        return 0; // Exceeded timeout, fail.
+      }
+    }
+  #endif
+
+  return count;
+}
diff --git a/ESP8266/sensornode_aRest/DHT.h b/ESP8266/sensornode_aRest/DHT.h
new file mode 100644
index 0000000..d81f6db
--- /dev/null
+++ b/ESP8266/sensornode_aRest/DHT.h
@@ -0,0 +1,75 @@
+/* DHT library
+
+MIT license
+written by Adafruit Industries
+*/
+#ifndef DHT_H
+#define DHT_H
+
+#if ARDUINO >= 100
+ #include "Arduino.h"
+#else
+ #include "WProgram.h"
+#endif
+
+
+// Uncomment to enable printing out nice debug messages.
+//#define DHT_DEBUG
+
+// Define where debug output will be printed.
+#define DEBUG_PRINTER Serial
+
+// Setup debug printing macros.
+#ifdef DHT_DEBUG
+  #define DEBUG_PRINT(...) { DEBUG_PRINTER.print(__VA_ARGS__); }
+  #define DEBUG_PRINTLN(...) { DEBUG_PRINTER.println(__VA_ARGS__); }
+#else
+  #define DEBUG_PRINT(...) {}
+  #define DEBUG_PRINTLN(...) {}
+#endif
+
+// Define types of sensors.
+#define DHT11 11
+#define DHT22 22
+#define DHT21 21
+#define AM2301 21
+
+
+class DHT {
+  public:
+   DHT(uint8_t pin, uint8_t type, uint8_t count=6);
+   void begin(void);
+   float readTemperature(bool S=false, bool force=false);
+   float convertCtoF(float);
+   float convertFtoC(float);
+   float computeHeatIndex(float temperature, float percentHumidity, bool isFahrenheit=true);
+   float readHumidity(bool force=false);
+   boolean read(bool force=false);
+
+ private:
+  uint8_t data[5];
+  uint8_t _pin, _type;
+  #ifdef __AVR
+    // Use direct GPIO access on an 8-bit AVR so keep track of the port and bitmask
+    // for the digital pin connected to the DHT.  Other platforms will use digitalRead.
+    uint8_t _bit, _port;
+  #endif
+  uint32_t _lastreadtime, _maxcycles;
+  bool _lastresult;
+
+  uint32_t expectPulse(bool level);
+
+};
+
+class InterruptLock {
+  public:
+   InterruptLock() {
+    noInterrupts();
+   }
+   ~InterruptLock() {
+    interrupts();
+   }
+
+};
+
+#endif
diff --git a/ESP8266/sensornode/aREST.h b/ESP8266/sensornode_aRest/aREST.h
similarity index 100%
rename from ESP8266/sensornode/aREST.h
rename to ESP8266/sensornode_aRest/aREST.h
diff --git a/ESP8266/sensornode_aRest/sensornode.ino b/ESP8266/sensornode_aRest/sensornode.ino
new file mode 100644
index 0000000..2266b0b
--- /dev/null
+++ b/ESP8266/sensornode_aRest/sensornode.ino
@@ -0,0 +1,130 @@
+#include "DHT.h"
+#include <ESP8266WiFi.h>
+#include "aREST.h"
+#include <climits>
+
+//If the debug macro is enabled, there's a freeMemory routine
+//Check if this resolves the crashes...
+#define DEBUG_MODE 1
+
+
+//DHT settings:
+#define DHTPIN 14     // what digital pin we're connected to
+
+#define MEASURESECONDS 60 //shouldn't be < 2sec
+
+// Uncomment whatever type you're using!
+//#define DHTTYPE DHT11   // DHT 11
+#define DHTTYPE DHT22   // DHT 22  (AM2302), AM2321
+//#define DHTTYPE DHT21   // DHT 21 (AM2301)
+
+
+// Initialize DHT sensor.
+// Note that older versions of this library took an optional third parameter to
+// tweak the timings for faster processors.  This parameter is no longer needed
+// as the current DHT reading algorithm adjusts itself to work on faster procs.
+DHT dht(DHTPIN, DHTTYPE);
+
+// Create aREST instance
+aREST rest = aREST();
+
+// WiFi settings:
+const char* ssid = "Your_SSID";
+const char* password = "Your_Password";
+
+#define LISTEN_PORT 80
+
+// Create an instance of the server
+WiFiServer server(LISTEN_PORT);
+
+// Variables to be exposed to the API
+float temperature;
+float humidity;
+
+
+//milli counter
+unsigned long millitotal = 0;
+float millicounter = 0;
+
+//Temp variables
+float h, t;
+
+//First measurement
+bool firstmeasurement = true;
+
+
+void setup() {
+  Serial.begin(115200);
+  Serial.println("Sensornode start");
+
+  //dht driver initialization
+  dht.begin();
+
+  //Expose variables to the rest api
+  rest.variable("temperature", &temperature);
+  rest.variable("humidity", &humidity);
+
+  // Set a ID (ID must be greater than 0)
+  rest.set_id("1");
+  rest.set_name("sensornode");
+
+
+  // Connect to WiFi
+  Serial.println("Connecting to wlan");
+  WiFi.begin(ssid, password);
+  while (WiFi.status() != WL_CONNECTED) {
+    delay(500);
+    Serial.print(".");
+  }
+  Serial.println("\nWiFi connected");
+
+  // Start the server
+  server.begin();
+  Serial.println("Server started");
+
+  // Print the IP address
+  Serial.println(WiFi.localIP());
+}
+
+void loop() {
+  // Wait a few seconds between measurements.
+  millicounter = millis();
+  
+  if (millicounter >= millitotal) {
+    // Reading temperature or humidity takes about 250 milliseconds!
+    // Sensor readings may also be up to 2 seconds 'old' (its a very slow sensor)
+    h = dht.readHumidity();
+    // Read temperature as Celsius (the default)
+    t = dht.readTemperature();
+    
+    // Check if any reads failed and exit early (to try again).
+    if (isnan(h) || isnan(t)) {
+      Serial.println("Failed to read from DHT sensor!");
+      return;
+    } else {
+      //set the new values
+      humidity = h;
+      temperature = t;
+    }
+
+    //set new milli counter
+    //millis will overflow after approx. 52 days. To prevent errors we're checking the limits
+    if (millis() + (MEASURESECONDS * 1000) <= ULONG_MAX) {
+      millitotal = millis() + (MEASURESECONDS * 1000);
+    } else {
+      millitotal = 0;
+    }
+  }
+  // Handle REST calls
+  WiFiClient client = server.available();
+  if (!client) {
+    return;
+  }
+  while(!client.available()){
+    delay(1);
+  }
+  rest.handle(client);
+
+  //Let the esp chill a bit
+  delay(100);
+}